Mtumode - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

mtumode

Sets or gets the MTU mode. The mtumode and mtusize commands allow you to change the Maximum
Transmission Unit (MTU) size, to adjust for the best interoperability with the host network. Set mtumode to
specify, then use mtusize to specify a value. If mtumode is set to default, the system automatically
sets the MTU value to 1260.
Syntax
mtumode <get|default|specify>
Parameter
get
default
specify
Feedback Examples
● mtumode default
returns
mtumode default
● mtumode specify
returns
mtumode specify
● mtumode get
returns
mtumode specify
● mtusize 660
returns
mtusize 660
● mtumode foo
returns
error: command has illegal parameters
See Also
See also the related mtusize
Polycom, Inc.
Description
Returns the current setting.
Sets the Maximum Transmission Unit size to the default
value of 1260.
Allows you to specify a Maximum Transmission Unit size
other than the default setting.
command on page 352.
System Commands
351