Keysight N6705C Operating And Service Manual page 453

9 Service and Maintenance
Step 5. Unhook the cable tie from the bulk shroud and remove four screws using a T20 driver. (Figure
shows PCA boards removed for clarity)
Step 6. Gently lift bulk shroud out of mainframe and place on right side of mainframe (non-handle side
- right side when viewed from front).
Step 7. Carefully stand mainframe on its right end and remove three screws using a T10 driver from
the side opposite to the backplane board.
Keysight N6705C Operating and Service Guide 453