Keysight N6705C Operating And Service Manual page 38

1 Quick Reference
:MANufacturer "<manufacturer>"
:DEFault
:MODel "<model number>"
:DEFault
:REBoot
:SECurity
:IMMediate
:SET <data>
:SET?
:TIME <hh>,<mm>,<ss>
:VERSion?
TRIGger
:ACQuire
[:IMMediate] (@chanlist)
:CURRent
[:LEVel] <value>, (@chanlist)
:SLOPe POSitive|NEGative, (@chanlist) Sets the current trigger slope.
:SOURce <source>, (@chanlist)
:TOUTput
[:ENABle] 0|OFF|1|ON, (@chanlist)
:VOLTage
[:LEVel] <value>, (@chanlist)
:SLOPe POSitive|NEGative, (@chanlist) Sets the voltage trigger slope.
:ARB
:SOURce <source>
:DLOG
[:IMMediate]
:CURRent
[:LEVel] <value>, (@chanlist)
:SLOPe POSitive|NEGative, (@chanlist) Sets the current trigger slope of the data logger.
:SOURce <source>
:VOLTage
[:LEVel] <value>, (@chanlist)
:SLOPe POSitive|NEGative, (@chanlist) Sets the voltage trigger slope of the data logger.
:ELOG
[:IMMediate] (@chanlist)
:SOURce <source>, (@chanlist)
:HISTogram
38
Changes the manufacturer identity.
Sets the manufacturer identity to the factory default.
Changes the model number.
Sets the model number to the factory default.
Reboots the instrument to its power-on state.
Clears all user memory and reboots the instrument.
Sets the instrument to the specified state.
Retrieves the current instrument state.
Sets the time of the system clock.
Returns the SCPI version that the instrument complies with.
Triggers the measurement immediately.
Sets the current trigger level.
Selects the trigger source for the acquisition system:
BUS |CURRent<1-4> |EXTernal |PIN<1-7> |TRANsient<1-4> |VOLTage<1-4>
Enables measurement triggers to be sent to a digital port pin.
Sets the voltage trigger level.
Selects the trigger source for the arbitrary waveform:
BUS |EXTernal |IMMediate
Triggers the internal data logger immediately.
Sets the current trigger level of the data logger.
Selects the trigger source for internal data logging:
BUS |CURRent<n> |EXTernal |IMMediate |VOLTage<n> |ARSK |OOOK
Sets the voltage trigger level of the data logger.
Triggers the external data logger immediately.
Selects the trigger source for external data logging:
BUS |EXTernal |IMMediate| PIN<1-7>
(HISTogram commands only apply to models N6781A/82A/85A/86A)
Keysight N6705C Operating and Service Guide