Keysight N6705C Operating And Service Manual page 252

7 SCPI Programming Reference
Parameter
0 – 262.144 | MIN | MAX, *RST 0
Step 0 - 99, *RST 0
Programs a start time for the current staircase:ARB:CURR:STA:STAR:TIM 1,(@1)
Programs a start time for the voltage staircase:ARB:VOLT:STA:STAR:TIM 1,(@1)
Programs a start time for step 0:ARB:SEG:STEP:CURR:STA:STAR:TIM 1, 0,(@1)
[SOURce:]ARB:CURRent:STAircase:TIMe <
[SOURce:]ARB:CURRent:STAircase:TIMe? [MIN|MAX,] (@<chanlist>)
[SOURce:]ARB:VOLTage:STAircase:TIMe<
[SOURce:]ARB:VOLTage:STAircase:TIMe? [MIN|MAX,] (@<chanlist>)
Specifies the total time to complete all of the staircase steps in seconds. Referenced to t1 in the
Staircase diagrams. Each step is of equal time.
[SOURce:]ARB:SEQuence:STEP:CURRent:STAircase:TIMe <
[SOURce:]ARB:SEQuence:STEP:CURRent:STAircase:TIMe? [MIN|MAX,] <
[SOURce:]ARB:SEQuence:STEP:VOLTage:STAircase:TIMe <
[SOURce:]ARB:SEQuence:STEP:VOLTage:STAircase:TIMe? [MIN|MAX,] <
Specifies the total time to complete all of the staircase steps in seconds for Arb sequence steps.
Parameter
0 – 262.144 | MIN | MAX, *RST 1
Step 0 - 99, *RST 0
Programs a time for the current staircase: ARB:CURR:STA:TIM 10,(@1)
Programs a time for the voltage staircase: ARB:VOLT:STA:TIM 10,(@1)
Programs a time for step 0:ARB:SEG:STEP:CURR:STA:TIM 10, 0,(@1)
252
value
>, (@<chanlist>)
value
>, (@<chanlist>)
value step#
>, <
value step#
>, <
Typical Return
<start time>
(none)
>, (@<chanlist>)
step#
>, (@<chanlist>)
>, (@<chanlist>)
step#
>, (@<chanlist>)
Typical Return
<staircase time>
(none)
Keysight N6705C Operating and Service Guide