4 . 4 . 1 5 Rlcofs - Hitachi HD64411 Q2 User Manual

4 . 4 . 1 5 RLCOFS

Command Format
1. Code
B'10011
2. Rendering Attributes
Multi-Valued Binary
Source Source
× ×
Fixed at Fixed at Fixed at
0 0 0
× : Cannot be used
3. Command Parameters
XO, YO: Relative specification
Description
Sets the local offset of the rendering coordinate system and the local offset of the work coordinate
system with relative coordinates from the old local offset. After this setting is made, this offset
value is added in all subsequent coordinate specifications.
The old local offset refers to the local offset value set by the lcofs command. If the local offset is
to be reflected in the current pointer, execute a MOVE command after setting the offset with an
lcofs or rlcofs command.
106
15
CODE
XO
Reference Data
Binary
Work
×
Draw Mode
Reserved
Fixed at Fixed at Fixed at
0 0 0
0
DRAW MODE
YO
Drawing Destination
Specified
Color Rendering
× ×
Fixed at Fixed Fixed
0 at 0
Work
×
Fixed Fixed
at 0 at 0 at 0