Fresenius Medical Care 2008K Operator's Manual page 162

162
Fail * Actuator Temperature test has failed.
Temperature High
Fail * Actuator
Temperature Low
Fail * Actuator TMP High Transmembrane Pressure (TMP) test
has failed.
Fail * Actuator TMP Low
Fail * Actuator Venous Venous Pressure test has failed.
High
Fail * Actuator Venous
Low
Fail * Air Detector Air detector test has failed.
Fail * Arterial High Soft Arterial Pressure test has failed.
Fail * Arterial Low Soft
Fail * Arterial High Hard
Fail * Arterial Low Hard
Fail * Blood Leak 1 Blood Leak test has failed.
Fail * Blood Leak 2
Fail * Cond High Soft Conductivity test has failed.
Fail * Cond Low Soft
Fail * (Get Neg TMP) Get Neg TMP test has failed.
Fail * (Get Pos TMP) Get Pos TMP test has failed.
Chapter 6—Alarms and Troubleshooting
2008K Hemodialysis Machine Operator's Manual Rev P
Test Verify stable temp. Rerun test. If failure repeats, remove machine
Message from service and alert a qualified service technician to recalibrate if
failure repeats
Test Rerun test. If failure repeats, remove machine from service and alert
Message a qualified service technician.
Test Rerun test, if failure repeats, remove machine from service and alert
Message a qualified service technician.
Test Reposition venous drip chamber. Rerun Test. If failure repeats,
Message remove machine from service and alert a qualified service technician.
Test Rerun test, if failure repeats, remove machine from service and alert
Message a qualified service technician.
Test Verify absence of air bubbles in flow indicator. Rerun test. If failure
Message repeats, remove machine from service and alert a qualified service
technician.
Test Rerun test, if failure repeats, remove machine from service and alert
Message a qualified service technician.
Test Check UF pump. Rerun test. If failure repeats, remove machine
Message from service and alert a qualified service technician.
Test Rerun test. If failure repeats, remove machine from service and alert
Message a qualified service technician.