Installation Of The Intake Silencer With Integrated Airfilter - Rotax 125 MAX Installation Instructions And Operators Manual

10)

Installation of the intake silencer with integrated airfilter

.
Procedures
Effectivity: 125 MAX/Junior MAX/Mini MAX/Micro MAX
Edition 1/Rev. 0
NOTICE
WARNUNG
See Fig. 9.
Step
1 Install intake silencer tube (2) in a horizontal position in the
bottom half of intake silencer (1), so that the rounded intake
openings point outwards.
2 Fit the carburetor socket (6) into the top half of silencer (5),
so that the arrow on the socket points towards the carbure-
tor.
3 Assemble the silencer components as shown in
join the 2 silencer halves using the supplied Allen screws
(10), washers (9), nuts (7) and the support bracket (8).
4 Attach the intake silencer using the supplied hose clamps
(11) to the carburetor.
NOTE: The carburetor socket (6) is asymmetrical and
can be turned so that the best possible position
for maximum legroom can be achieved.
BRP-Powertrain
Airstream to the radiator must not be impe-
ded by the intake silencer.
Procedure
Fig. 9 and
page 1-21
February 01/2014