Installation Of The Intake Silencer With Integrated Airfilter - Rotax 125 MAX evo Installation Instructions And Operation Manual

ROTAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo

10. Installation of the intake silencer with integrated airfilter

See Fig. 19.
 Install intake silencer tube (pos. 2) in a vertical position in the bottom half of intake
silencer case (pos. 1) so that the rounded intake openings point outwards.
 Fit the carburetor socket (pos. 6) into the top half of intake silencer case (pos. 5) so
that the arrow on the socket points towards the carburetor.
 Install the filter element (pos. 4) with holders (pos. 3) into the bottom half of
intake silencer case (pos. 1).
 Assemble bottom half of intake silencer case (pos. 1) with top half (pos. 5) as shown
in following illustration. Make sure that the locking is interlocked properly.
 Attach the intake silencer with the supplied hose clamp (pos. 11) on the carburetor.
 Note: The carburetor socket (pos. 6) is asymmetrical and can be turned so that the best
possible position between carburetor and intake silencer can be achieved.
 Attach the intake silencer on the support bracket (pos. 8) using 2 Allen screws
M6x20 (pos. 10) with washers (pos. 9) and nuts (pos. 7).
Seite/page 66/98
K00432 / Fig. 21
Ausgabe/Edition 11/2014