Show Mls Qos Aggregate-Policer - Cisco Catalyst 3750 Metro Command Reference Manual

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands

show mls qos aggregate-policer

Use the show mls qos aggregate-policer user EXEC command to display the quality of service (QoS)
aggregate policer configuration. A policer defines a maximum permissible rate of transmission, a
maximum burst size for transmissions, and an action to take if either maximum is exceeded.
Syntax Description aggregate-policer-name
Command Modes
User EXEC
Command History Release
12.1(14)AX
Examples This is an example of output from the show mls qos aggregate-policer command:
Switch> show mls qos aggregate-policer policer1
aggregate-policer policer1 88000 2000000 exceed-action drop
Not used by any policy map
Related Commands Command
mls qos aggregate-policer
OL-9645-10
show mls qos aggregate-policer [aggregate-policer-name]
(Optional) Display the policer configuration for the specified name.
Modification
This command was introduced.
Description
Defines policer parameters that can be shared by multiple classes
within the same policy map.
Catalyst 3750 Metro Switch Command Reference
show mls qos aggregate-policer
2-557