Volume - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

volume

Sets or gets the call audio volume (not sound effects) on the system or registration for volume changes.
Syntax
volume <register|unregister>
volume <get|up|down|set {0..50}>
volume range
Parameter
register
unregister
get
up
down
set
range
Feedback Examples
● volume register
returns
volume registered
● If entered again,
volume register
returns
info: event/notification already active:volume
● volume set 23
returns
volume 23
● volume up
returns
volume 24
● volume get
returns
volume 24
Comments
Changes the call audio volume (not sound effects) on the system.
Polycom, Inc.
Description
Registers to receive notification when the volume
changes.
Disables register mode.
Returns the current volume level.
Increases the audio volume by 1.
Decreases the audio volume by 1.
Sets the volume to a specified level. Requires a volume
setting from {0..50}.
Returns the valid volume range available to the user.
System Commands
563