Remotecontrol - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

remotecontrol

Set or gets the setting for intercepting signals from the system remote control.
Syntax
remotecontrol disable <get|all|none>
remotecontrol disable "valid button" ["valid button"...]
remotecontrol dontintercept <all|none>
remotecontrol dontintercept "valid button" ["valid button"...]
remotecontrol enable <all|none>
remotecontrol enable "valid button" ["valid button"...]
Parameter
disable
get
all
none
"valid button"
enable
power
Feedback Examples
● remotecontrol disable all
returns
remotecontrol disable all success
● remotecontrol disable get
returns
disabled 1 buttons:pip
Comments
Remote control disable commands do not persist across the power cycle.
Polycom, Inc.
Description
Disables specified remote control button(s) so that the
system does not respond.
Returns the current setting.
All of the remote control buttons.
None of the remote control buttons.
Name of a specific button such as call, hangup, left,
right, up, down, select, home, directory, back, zoom-,
zoom+, volume-, volume+, mute, far, near, auto,
camera, preset, pip, keyboard, delete, ., 0-9, *, #,
graphics, or help.
Enables specified remote control button(s).
Enables or disables the Power button on the remote
control.
System Commands
395