Sleeptext - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

sleeptext

Sets or gets the text to be displayed with the logo for 15 seconds as the system goes into sleep mode.
Syntax
sleeptext get
sleeptext set ["text"]
Parameter
get
set
"text"
Feedback Examples
● sleeptext set
returns
sleeptext <empty>
● sleeptext set "Pick up the remote control to use the system"
returns
sleeptext "Pick up the remote control to use the system"
Polycom, Inc.
Description
Returns the current text.
Sets the text to be displayed on the screen saver when
followed by the "text" parameter. To erase the
current setting, omit "text".
Screen saver text to be displayed when the system is in
sleep mode. Enclose the text in quotation marks if it
includes spaces.
System Commands
416