Polycom HDX 9006 Integrator's Manual page 445

Integrator's Reference Manual for Polycom HDX Systems
Parameter
address
Polycom, Inc.
Description
Obtains the address information for a specified entry. If
the entry is an ITP system, the results include the
addresses for all codecs. If the codecs support multiple
protocols, the different addresses are returned on
separate lines. This command is not supported for
multisite entries.
The response is in the following format:
speeddial address {0..n}.
name:"sys_name"
sys_label:"sys_label"
h323_spd:"h323_spd"
h323_num:"h323_num"
h323_ext:"h323_ext"
speeddial address {0..n}.
name:"sys_name"
sys_label:"sys_label"
sip_num:"sip_num"
speeddial address {0..n}.
name:"sys_name"
sys_label:"sys_label"
speeddial address {0..n}.
name:"sys_name"
sys_label:"sys_label"
phone_num:"phone_num"
speeddial address {0..n}.
name:"sys_name"
sys_label:"sys_label"
isdn_spd:"isdn_spd"
isdn_num:"isdn_num"
isdn_ext:"isdn_ext"
...
speeddial address name:"sys_name"
sys_label:"sys_label"
codec:<1..4>
codec:<1..4>
sip_spd:"sip_spd"
codec:<1..4>
xmpp:"xmpp_addr"
codec:<1..4>
codec:<1..4>
System Commands
427