Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
systemsetting componentresolution1
Specifies the component output resolution of Monitor 2.
Syntax
systemsetting componentresolution1 <720p|1080i|1080p>
systemsetting get componentresolution1
Parameter
<720p|1080i|1080p>
get
Feedback Examples
● systemsetting componentresolution1 720p
returns
systemsetting componentresolution1 720p
● systemsetting get componentresolution1
returns
systemsetting componentresolution1 720p
Comments
This command sets the output resolution for Monitor 2 if configured for component output.
This command is not supported on HDX 6000 systems.
Polycom, Inc.
Description
Specifies the component output resolution of Monitor 2.
Choices are:
720p--720P HD Video
•
1080i--1080i HD Video (not supported on HDX
•
9001, 9002, or 9004 systems.)
1080p--1080p HD Video (not supported on HDX
•
9001, 9002, or 9004 systems.)
Returns the current setting.
System Commands
455
Advertisement
Table of Contents
Need help?
Do you have a question about the HDX 9006 and is the answer not in the manual?
Questions and answers