Polycom HDX 9006 Integrator's Manual page 422

Integrator's Reference Manual for Polycom HDX Systems
rt
Sets or gets the RT serial interface control signal (receive timing: clock). This command is only applicable
if you have a V.35 network interface connected to your system.
Syntax
rt <get|normal|inverted>
Parameter
get
normal
inverted
Feedback Examples
● rt normal
returns
rt normal
● rt inverted
returns
rt inverted
● rt get
returns
rt inverted
Comments
The default setting is normal.
Polycom, Inc.
Description
Returns the current setting.
Sets the signal to normal (rising edge receives data).
Sets the signal to inverted (falling edge receives data).
System Commands
404