Ldapauthenticationtype - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

ldapauthenticationtype

Sets or gets the authentication type required to authenticate with an LDAP server.
Syntax
ldapauthenticationtype get
ldapauthenticationtype set <anonymous|basic|ntlm>
Parameter
get
set
anonymous
basic
ntlm
Feedback Examples
● ldapauthenticationtype get
returns
ldapauthenticationtype anonymous
● ldapauthenticationtype set basic
returns
ldapauthenticationtype basic
● ldapauthenticationtype set ntlm
returns
ldapauthenticationtype ntlm
Polycom, Inc.
Description
Returns the current setting.
Sets the authentication type of an LDAP server.
Note: This parameter does not change the setting on the
server. Instead, this parameter changes how the
Polycom system recognizes the server.
Specifies "anonymous" as the authentication type of an
LDAP server.
Specifies "basic" as the authentication type of an LDAP
server.
Specifies "ntlm" as the authentication type of an LDAP
server. This is the default setting.
System Commands
324