Snmptrapversion - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

snmptrapversion

Sets or gets the SNMP trap version.
Syntax
snmptrapversion get
snmptrapversion set <v1|v2c>
Parameter
get
set
v1|v2c
Feedback Examples
● snmptrapversion set v1
returns
snmptrapversion v1
● snmptrapversion set v2c
returns
snmptrapversion v2c
● snmptrapversion get
returns
snmptrapversion v2c
Comments
After making a change, you must restart the system for the setting to take effect.
Polycom, Inc.
Description
Returns the current setting.
Sets the SNMP trap protocol that the system uses.
SNMP trap version 1 or version 2c.
System Commands
423