Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
ipv6addrmode
Sets or gets the ability for the system to act as a client and receive an address, specify an address manually,
or completely disable IPv6.
Syntax
ipv6addrmode <get|client|manual|off>
Parameter
get
client
manual
off
Feedback Examples
● ipv6addrmode get
returns
ipv6addrmode client
● ipv6addrmode off
returns
ipv6globaladdress off
Comments
This setting is applicable for both IPv4 and IPv6 configurations.
After making a change, you must restart the system for the setting to take effect.
Polycom, Inc.
Description
Returns the current setting.
IPv6 addresses from network elements.
Allows full configuration of IPv6 addresses.
Disables IPv6 addressing.
System Commands
309
Advertisement
Table of Contents
