Integrator's Reference Manual for Polycom HDX Systems
rs366dialing
Sets or gets RS-366 dialing. This command is only applicable if you have a V.35 network interface
connected to your system.
Syntax
rs366dialing <get|on|off>
Parameter
get
on
off
Feedback Examples
● rs366dialing on
returns
rs366dialing on
● rs366dialing off
returns
rs366dialing off
● rs366dialing get
returns
rs366dialing off
Comments
Enable this option if you want to call from the system through the DCE connection to the far-site video
conferencing system. Disable this option if you are using your DCE to dial the call or if you have a dedicated
connection to the far site.
Polycom, Inc.
Description
Returns the current setting.
Enables RS-366 dialing.
Disables RS-366 dialing.
System Commands
403