Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
rs232 mode, rs232port1 mode
The rs232 mode command sets or gets the operational mode of the first RS-232 port.
For systems with two serial ports, use rs232port1 mode to set the mode for the second serial port.
Syntax
rs232 mode
<get|passthru|control|debug|camera_ptz|closed_caption|vortex_mixer|cps|interactive_t
ouch_board|polycom_annotation|
smartboard|pointmaker>
rs232port1 mode <get|passthru|control|debug|camera_ptz|closed_caption|
vortex_mixer|cps|interactive_touch_board|polycom_annotation|
smartboard|pointmaker>
Parameter
get
passthru
off
control
debug
camera_ptz
closed_caption
vortex_mixer
interactive_touch_
board
smartboard
polycom_annotation
cps|pointmaker
Feedback Examples
● rs232 mode control
returns
rs232 mode control
● rs232port1 mode closed_caption
returns
rs232port1 mode closed_caption
● rs232port1 mode get
returns
rs232port1 mode control
Polycom, Inc.
Description
Returns the current mode setting.
Sets the RS-232 port to Pass Thru mode.
Sets the operational mode of the RS-232 port to off.
Sets the RS-232 port to Control mode.
Sets the RS-232 port to Debug mode.
Sets the RS-232 port to Camera PTZ mode.
Sets the RS-232 port to Closed Caption mode.
Sets the RS-232 port to Vortex Mixer mode.
Sets the RS-232 port to Interactive Touch Board mode.
Sets the RS-232 port to Interactive Touch Board mode
(to control a Polycom SMART board device).
Sets the RS-232 port to Polycom Annotation mode.
Reserved for future applications.
System Commands
402
Advertisement
Table of Contents
