Setting The Speaker Volume - Polycom HDX 4000 Series Administrator's Manual

Setting the Speaker Volume

Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
system, and the other speaker on the left side. The system reverses the left and
right channels for the far site, as shown in the following illustration. This
ensures that the sound comes from the appropriate side of the room.
Left
Right
Sending stereo
For best results, place the speakers about 60° apart as seen from the center of
the conference table.
Left speaker
Connect to left
audio output
(white)
If you use the subwoofer in the Polycom StereoSurround kit, place it beside a
wall or in a corner near the speakers.
To set the volume of an external speaker system:
Go to System > Diagnostics >Audio > Speaker Test.
1
Start the speaker test.
2
Microphones and Speakers
Right
Left
Receiving stereo
Right speaker
Connect to right
audio output (red)
60°
4–13