Polycom HDX 9006 Integrator's Manual page 27

Integrator's Reference Manual for Polycom HDX Systems
Polycom EagleEye HD Camera as the Main or Second Camera up to 100 ft Away
To connect a Polycom EagleEye HD camera (part number 8200-23600-001 8200-23610-001,
8200-08270-xxx, 8200-08260-xxx, or 7200-25689-xxx) to a Polycom HDX 9000 Series system
more than 30 ft away:
Option 1
●
HDCI Analog Camera Cable
● Power supply. Use only the approved power supply from Polycom (part number 1465-52748-040).
Do not exceed 12 Volts at 3 Amps. Verify the polarity of the power supply as shown on the Polycom
camera next to the power supply input.
Use Polycom Power Supply Only
Option 2
● A—Two
HDCI Camera Break-Out Cable
● B—Coaxial analog video cables.
● C—DB-9 serial cable.
● Power supply. Use only the approved power supply from Polycom (part number 1465-52748-040).
Do not exceed 12 Volts at 3 Amps. Verify the polarity of the power supply as shown on the Polycom
camera next to the power supply input.
Polycom, Inc.
on page 54.
Polycom recommends this configuration when a custom cable length is not
required.
DC IN 12V
on page 57.
50 ft or 100 ft
Part Number: 1465-52733-040
Room Integration
9