Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
v35num
Sets or gets the ISDN video numbers assigned to the system. This command is only applicable if you have
a V.35 network interface connected to your system.
Syntax
v35num get <1b1|1b2>
v35num set <1b1|1b2> ["v35 number"]
Parameter
get
1b1|1b2
set
"v35 number"
Feedback Examples
● v35num set 1b1
returns
v35num 1b1 <empty>
● v35num set 1b2 7005551212
returns
v35num 1b2 7005551212
● v35num get 1b2
returns
v35num 1b2 7005551212
Comments
The 1b1 and 1b2 parameters follow the convention and nomenclature of the user interface and the
command on page 319.
See Also
See the
isdnnum
command on page 319.
Polycom, Inc.
Description
Returns the current ISDN video number associated with
a B channel of a particular line. Requires <1b1|1b2>.
B1 and B2 channels:
1b1 designates line 1, B channel 1 (B1).
1b2 designates line 1, B channel 2 (B2).
Sets the ISDN video number for a B channel line when
followed by a "v35 number" parameter. To erase the
current setting, omit the "v35 number" parameter.
1b1 is port 1 and 1b2 is port 2. This paramater is not
allowed while in a call.
Numeric string. This is the ISDN video number(s)
provided by your network service provider.
System Commands
isdnnum
548
Advertisement
Table of Contents
