Polycom HDX 9006 Integrator's Manual page 574

Integrator's Reference Manual for Polycom HDX Systems
● vcbutton source get
returns
vcbutton source get none
vcbutton source get succeeded
Polycom recommends registering for notifications. If vcbutton register is used for notifications, the following
responses occur.
● Pressing the play button at the far site
returns
Control event: vcbutton farplay
● Pressing the stop button on the local system
returns
Control event: vcbutton stop
Comments
The vcbutton stop command is global in Polycom HDX software version 2.0 or later. Previously, this
command was specific to the content video source to which it was mapped.
vcbutton 6 specifies sending ppcip as content. vcbutton map defaults to input 4. vcbutton map is
only required if you do not specify the input number when sending vcbutton play.
Polycom, Inc.
System Commands
556