Integrator's Reference Manual for Polycom HDX Systems
ipprecaudio, ipprecfecc, ipprecvideo
Sets or gets the IP Precedence priority level (Type of Service Value) for audio, far-end camera control
(FECC) and other call control channels, and video. The value for each can be between 0 and 7.
Syntax
ipprecaudio get
ipprecaudio set {0..7}
ipprecfecc get
ipprecfecc set {0..7}
ipprecvideo get
ipprecvideo set {0..7}
Parameter
get
set
Feedback Examples
● ipprecaudio set 5
returns
ipprecaudio 5
● ipprecaudio get
returns
ipprecaudio 5
Comments
The ipprecfecc command is equivalent to the Control setting in the user interface.
If the
typeofservice
command on page
Polycom, Inc.
Description
Returns the current setting.
Sets the IP precedence. A priority level is required. This
must be an integer in the range {0..7}.
is set to diffserv, these commands are not applicable.
538
System Commands
308