Polycom HDX 9006 Integrator's Manual page 254

Integrator's Reference Manual for Polycom HDX Systems
<multisitename0 site_name_0="dawn "/>
<mulitsitetype0 site_type_0="2" type_0="1000"/>
<mulitsiteprefcalltype0 pref_call_type_0="H323"/>
<multisiteuniqueid0 unique_id_0="local:28"/>
<multisitename1 site_name_1="dawn2 "/>
<mulitsitetype1 site_type_1="2" type_1="1000"/>
<mulitsiteprefcalltype1 pref_call_type_1="H323"/>
<multisiteuniqueid1 unique_id_1="local:30"/>
<multisitename2 site_name_2="dawn3 "/>
<mulitsitetype2 site_type_2="2" type_2="1000"/>
<mulitsiteprefcalltype2 pref_call_type_2="H323"/>
<multisiteuniqueid2 unique_id_2="local:29"/>
</address>
</entrytype>
<entrytype type="group"
uniqueid="local:38">
<address filename="testGroup1
" langid="
" displayname="testGroup1
" name="testGroup1">
<multisitename meeting_name="testGroup1" />
<multisitespeed meeting_speed="auto"/>
</address>
</entrytype>
</addresses>
</xml>
exportdirectory done
Comments
exportdirectory done indicates that all directory data has been exported.
When the system uses the Maximum security profile, this command is available only to Administrators.
Do not use exportdirectory to interpret the data that is returned. Simply store and use the data as input
to the importdirectory command or import directory utility in the web interface. The format of the
exported directory data might change in future software releases and any application attempting to interpret
the data could find its ability to do so compromised in later releases of Polycom HDX software.
Exporting a directory on one system model and importing the directory on another model is not supported.
Attempts to export and import directory information between different systems might also fail. The message
importdirectory failed indicates that the system was not able to import the information.
When importing directory data back into the system, use the data in its entirety (not edited in any form).
There is information that is used by the system to determine what type (XML or CSV) of data is being
imported.
Additional Usage Notes:
Polycom, Inc.
name="testGroup1" filename="testGroup1"
System Commands
236