Speeddial - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

speeddial

Returns speed dial (Sites) entries. Note that the speed dial commands and responses are nearly identical
to the corresponding local address book commands.
Syntax
speeddial names <all|video|phone> [<range_start>] [<range_end>]
speeddial names <all|video|phone> size
speeddial group "group_name" [<range_start>] [<range_end>]
speeddial group "group_name" size
speeddial address "sys_name" ["sys_label"]
Parameter
names
<all|video|phone>
size
range_start
range_end
Polycom, Inc.
Description
Returns a list of system names in the speed dial (Sites)
list. Also returns the system type: video, multicodec,
phone, or multisite. A multicodec system appears as a
single row.
The response is in the following format:
speeddial names {0..n}. name:"sys_name"
<video|multicodec|phone|group>
...
speeddial names <all|video|phone> done
Specifies the type of entries to return. video returns
entries that have video addresses. phone returns
entries that have only phone numbers and no video
numbers. all returns entries with video numbers or
phone numbers or both.
Returns the size of the result set that will be returned by
the command. The size parameter can be used with the
names command.
The response is returned in the following format:
speeddial names <all|video|phone> size
{0..n}
For the names and group command, specifies the
beginning of the range of entries to return.
For the names and group command, specifies the end
of the range of entries to return. If a range_start is
specified without a range_end, then the single
range_start entry is returned. If range_end is -1, all
entries starting with range_start are returned.
sys_label:"sys_label"
type:
System Commands
425