Systemsetting Whitebalancemode1 - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

systemsetting whitebalancemode1

Sets or returns the user white balance mode for a Polycom camera on Camera port 2.
Syntax
systemsetting whitebalancemode1 <atw|indoor|3680K|4160K|4640K|5120K|outdoor|awc>
systemsetting get whitebalancemode1
Parameter
<atw|indoor|3680K|416
0K|4640K|5120K|outdo
or|awc>
get
Feedback Examples
● systemsetting whitebalancemode1 awc
returns
systemsetting whitebalancemode1 awc
● systemsetting get whitebalancemode1
returns
systemsetting whitebalancemode1 awc
Comments
This command is supported on HDX 8000 and HDX 9000 series systems only. This command is not
supported for non-Polycom cameras.
Polycom, Inc.
Description
atw—Manual one touch white balance
indoor—Indoor lighting
3680K—3680° Kelvin
4160K—4160° Kelvin
4640K—4640° Kelvin
5120K—5120° Kelvin
outdoor—Outdoor lighting
awc—Automatic white balance
Returns the current setting.
System Commands
531