Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
Parameter
farendleft
off
Feedback Examples
● audiometer micleft
returns
audiometer micleft level peak:-19
audiometer micleft level peak:-19
audiometer micleft level peak:-19
audiometer micleft level peak:-20
audiometer micleft level peak:-20
audiometer micleft level peak:-20
audiometer micleft level peak:-20
and so on until you enter
audiometer off
● audiometer micright
returns
audiometer micright level peak:-19
audiometer micright level peak:-19
audiometer micright level peak:-19
audiometer micright level peak:-20
audiometer micright level peak:-20
audiometer micright level peak:-20
audiometer micright level peak:-20
and so on until you enter
audiometer off
Comments
Audio level of a port is measured on the spectrum ranging from -20 dB to +20 dB. Use the audiometer
command for a different port to stop monitoring a previous port and to begin monitoring a new port. To turn
off monitoring, use audiometer off and watch for the audiometer off acknowledgement or registration
response, which confirms that the audiometer monitoring is turned off.
Polycom, Inc.
Description
Measures the strength of the signal on the left channels
of all far-site audio inputs.
Turns off audiometer output.
System Commands
142
Advertisement
Table of Contents
