Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
areacode
Sets or gets the area code for all ISDN lines. This command is only applicable if you have a network
interface connected to your system.
Syntax
areacode get
areacode set "areacode"
Parameter
get
set
"areacode"
Feedback Examples
● areacode set 212
returns
areacode 212
● areacode get
returns
areacode 212
Comments
This area code is associated with the area where the system is used.
Polycom, Inc.
Description
Returns the area code information.
Sets the ISDN area code when followed by the area
code parameter. To erase the current setting, omit
"areacode".
Area code to use for all lines.
System Commands
140
Advertisement
Table of Contents
