Integrator's Reference Manual for Polycom HDX Systems
ldapsslenabled
Sets or gets the Secure Sockets Layer (SSL)/Transport Layer Security (TLS) encryption state for LDAP
operations.
Syntax
ldapsslenabled get
ldapsslenabled set [on|off]
Parameter
get
set
on
off
Feedback Examples
● ldapsslenabled get
returns
ldapsslenabled off
● ldapsslenabled set on
returns
ldapsslenabled on
Polycom, Inc.
Description
Returns the current setting.
Sets the SSL encryption state for LDAP operations.
Note: This parameter does not change the setting on the
server. Instead, this parameter changes how the
Polycom system recognizes the server.
Specifies "on" as the encryption state for LDAP
operations. This is the default setting.
Specifies "off" as the encryption state for LDAP
operations.
System Commands
332