Terms And Abbreviations - ABB ACS580-07 Hardware Manual

Task
Check the insulation of the supply cable, the motor and the motor cable.
Connect the power cables.
Connect the control cables.
Check the installation.
Start the drive up.
Operate the drive: start, stop, speed control etc.

Terms and abbreviations

Term/ Description
Abbreviation
CCU-24 Type of control unit
CHDI-01 115/230 V digital input extension module
CMOD-01 Multifunction extension module (external 24 V AC/DC and digital I/O extension)
CMOD-02 Multifunction extension module (external 24 V AC/DC and isolated PTC interface)
CPTC-02 Multifunction extension module (external 24 V and ATEX-certified PTC interface)
EMC Electromagnetic compatibility
FBIP-21 BACnet/IP adapter module
FCAN-01 Optional FCAN-01 CANopen adapter module
FCNA-01 Optional ControlNet™ adapter module
FDCO-01 DDCS communication module with two pairs of 10 Mbit/s DDCS channels
FDNA-01 Optional DeviceNet™ adapter module
FECA-01 Optional EtherCAT adapter module
FENA-11 Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols
FENA-21 Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols,
2-port
FEPL-01 Optional Ethernet POWERLINK adapter module
FPBA-01 Optional PROFIBUS DP adapter module
Frame, frame Physical size of the drive or power module
size
IGBT Insulated gate bipolar transistor
STO Safe torque off (IEC/EN 61800-5-2)
Introduction to the manual 23
See
Checking the insulation of the
motor and motor
cable (page 76)
Connecting the power
cables (page 74), Connecting
the control cables (page 84)
Installation checklist (page 107)
Start-up (page 109)
Start-up (page 109) and firmware
manual