Attaching Methods; Alternative 1 - Clamping - ABB ACS580-07 Hardware Manual

52 Mechanical installation
Note 1: Make height adjustments before attaching the cabinet with metal shims between
the cabinet bottom and the floor.
Note 2: If you remove the lifting eyes, attach the bolts back to retain the degree of protection
of the cabinet.
￭

Attaching methods

Attach the cabinet to the floor from the front and rear edge by using clamps delivered with
the drive, or bolt the cabinet to the floor through the holes inside if they are accessible.
Alternative 1 – Clamping
Clamp dimensions
1. Insert the clamps into the twin slots along the front
and rear edges of the cabinet frame body and at-
tach them to the floor with a bolt. The recommen-
ded maximum distance between the clamps in the
front edge is 800mm (31.5").
2. If floor mounting from back is not possible, attach
the cabinet at the top to wall with L-brackets (not
included in the delivery) using the lifting lug attach-
ing holes.
M16