82 Electrical installation
•
With top entry and top exit (options +H351 and +H353): Remove the shrouds and
door fan (see
Replacing the door fan (frames R10 and R11) (page
mounting screws and pull the shrouds out.
4. Remove the door fan mounting plate. See section
and R11) (page
119).
5. Peel off 3 to 5 cm of the outer insulation of the cables above the cable entries with the
conductive sleeves for the 360° high-frequency grounding.
6. Prepare the ends of the cables.
119)). Undo the
Replacing the door fan (frames R10