ABB ACS580-07 Hardware Manual page 15

• Frames R10 and R11: To prevent the drive module from falling, attach its top lifting lugs
with chains to the cabinet lifting lug before you push the module into the cabinet and
pull it from the cabinet. Push the module into the cabinet and pull it from the cabinet
carefully preferably with help from another person. Keep a constant pressure with one
foot on the base of the module to prevent the module from falling on its back. Make
sure that the module does not topple over when you move it on the floor. To extend the
support legs, press each leg a little down (1, 2) and turn it aside. Whenever possible
secure the module also with chains. The module overturns from a sideways tilt of 5
degrees.
1
2
• Beware of hot surfaces. Some parts, such as heatsinks of power semiconductors, and
brake resistors, remain hot for a while after disconnection of the electrical supply.
3
Safety instructions 15