Compliance With The European Low Voltage Directive; Compliance With The European Emc Directive; Compliance With The European Machinery Directive - ABB ACS580-07 Hardware Manual

194 Technical data
￭

Compliance with the European Low Voltage Directive

The compliance with the European Low Voltage Directive has been verified according to
standard EN 61800-5-1.
￭

Compliance with the European EMC Directive

The EMC Directive defines the requirements for immunity and emissions of electrical
equipment used within the European Union. The EMC product standard (EN 61800-3:2004)
covers requirements stated for drives. See section
below.
￭

Compliance with the European Machinery Directive

The drive is an electronic product which is covered by the European Low Voltage Directive.
However, the drive includes the Safe torque off function and can be equipped with other
safety functions for machinery which, as safety components, are in the scope of the
Machinery Directive. These functions of the drive comply with European harmonized
standards such as EN 61800-5-2. The declaration of conformity is shown below.
Compliance with the EN 61800-3:2004