ABB ACS580-07 Hardware Manual page 79

12. Seal the slot between the cable and mineral wool sheet (if used) with sealing compound
(eg, CSD-F, ABB brand name DXXT-11, code 35080082).
13. Connect the twisted shields of the motor cables to the ground bar and the phase
conductors to the U2, V2 and W2 terminals of the drive module. For drives with du/dt
filter (option +E205), connect the phase conductors to the T1/U2, T2/V2 and T3/W2
terminals of the cabinet with cable lugs.
14. Connect the twisted shields of the input cables and separate ground cable (if present)
to the PE terminal of the cabinet and the phase conductors to the L1, L2 and L3 terminals.
13
14
13
Electrical installation 79
14