Ambient Conditions - ABB ACS580-07 Hardware Manual

Ambient conditions

Environmental limits for the drive are given below. The drive is to be used in a heated,
indoor, controlled environment.
Installation site altitude
Air temperature
Relative humidity
Contamination
Chemical gases
Solid particles
Atmospheric pressure
Vibration
IEC 61800-5-1
IEC 60068-2-6:2007,
EN 60068-2-6:2008
Environmental testing Part
2: Tests –Test Fc: Vibra-
tion (sinusoidal)
Shock
IEC 60068-2-27:2008,
EN 60068-2-27:2009
Environmental testing -
Part 2-27: Tests - Test Ea
and guidance: Shock
Operation
installed for stationary use
0 to 2000 m (6561 ft)
above sea level. For alti-
tudes over 2000 m, con-
tact ABB.
Output derated above
1000 m (3281 ft). See
section Output derating
-0 to +50 °C (32 to 122
°F). No condensation al-
lowed. Output derated in
the range +40 ... +50 °C
(+104 ... +122 °F). See
section Output derating
5 to 95%
No condensation allowed. Maximum allowed relative humidity is 60% in the pres-
ence of corrosive gases.
IEC/EN 60721-3-3:2002:
Classification of environ-
mental conditions- Part 3-
3: Classification of groups
of environmental paramet-
ers and their severities -
Stationary use of weather
protected locations
Class 3C2
Class 3S2. No conductive
dust allowed.
70 to 106 kPa 0.7 to 1.05
atmospheres
IEC/EN 60721-3-3:2002
10...57 Hz: max. 0.075
mm amplitude 57...150
Hz: 1 g
Not allowed
Storage
in the protective package
-
-40 to +70 °C (-40 to +158
°F)
Max. 95%
IEC 60721-3-1:1997
Class 1C2
Class 1S3. (packing must
support this, otherwise
1S2)
70 to 106 kPa 0.7 to 1.05
atmospheres
IEC/EN 60721-3-1:1997
10...57 Hz: max. 0.075
mm amplitude 57...150
Hz: 1 g
With packing max. 100
m/s2 (330 ft./s2), 11 ms
Technical data 191
Transportation
in the protective package
-
-40 to +70 °C (-40 to +158
°F)
Max. 95%
IEC 60721-3-2:1997
Class 2C2
Class 2S2
60 to 106 kPa 0.6 to 1.05
atmospheres
IEC/EN 60721-3-2:1997
2...9 Hz: max. 3.5 mm
amplitude 9...20 Hz: 10
m/s2 (32.8 ft/s2)
With packing max. 100
m/s2 (330 ft./s2), 11 ms