Unpacking The Transport Package; Checking The Delivery - ABB ACS580-07 Hardware Manual

48 Mechanical installation
„
￭

Unpacking the transport package

This drawing shows the layout of the horizontal transport package.
6
1
3
1 Bracket for attaching the drive to the wooden
pallet
2 Cardboard packing hood
3 Wooden pallet
Unpack the horizontal transport package as follows:
1. Cut the strips (4)
2. Remove the hood (2)
3. Undo the screws that attach the bracket (1) to the wooden pallet.
4. Remove the plastic wrapping.
5. After checking the delivery (see section
cabinet to its installation place (see section
„
Unpack the vertical transport package as follows:
1. Undo the screws that hold the wooden elements of the transport crate together.
2. Remove the elements.
3. Remove the clamps with which the drive cabinet is mounted onto the transport pallet
by undoing the fastening screws.
4. Remove the plastic wrapping.
￭

Checking the delivery

The drive delivery contains:
2
4
5
5 Timber
6 Drive cabinet
- -
Checking the delivery (page
Lifting the cabinet (page
1
48)), lift the drive
49)).