Netbackup 5330 Cables And Connectors - VERITAS NetBackup 5330 Installation Manual

NetBackup 5330 cables and connectors

See "Installing disk drives into a primary shelf or an expansion shelf "
The following types of cables and connectors are provided:
Power cords that connect each device to AC power distribution units (PDUs) in
■
the rack.
Note: A 220VAC power supply is required for the Primary Storage Shelf and
the Expansion Storage Shelf. The NetBackup 5330 compute node can
accommodate a 120VAC or 220VAC input power supply.
The following list provides the voltages of the power connectors for the compute
node and storage shelves. The green pin denotes the ground.
The compute node uses the following outlet (C-13) and inlet (C-14) connectors.
These connectors are rated for the following:
Voltage: 125 - 250 VAC
■
Current: 15A
■
The storage shelves use the following outlet (C-19) and inlet (C-14) connectors.
Hardware overview
NetBackup 5330 cables and connectors
12
on page 44.