VERITAS NetBackup 5330 Installation Manual page 85

Accessing and using the Veritas Remote Management interface
5
A JViewer application opens that enables you to remotely monitor and control
the appliance. This application requires Java Runtime Environment (JRE)
version 6.0 or later. Install Java (as needed).
Caution: Starting with Java 7 update 45, you may receive a security warning
when you launch the KVM remote console from the appliance IPMI port. The
warning states that you do not have proper permissions and prevents appliance
access from the IPMI port. For information about how to resolve this issue,
refer to the following document:
http://www.veritas.com/support/TECH212531
6
You can now access and log on to the NetBackup Appliance Shell Menu. Enter
the user name and password for the appliance.
By default, the user name
number zero.
See "About IPMI configuration"
See "Configuring the IPMI port from the NetBackup Appliance Shell Menu"
on page 81.
Hardware installation procedures
has the password,
admin
on page 20.
where 0 is the
P@ssw0rd
85