VERITAS NetBackup 5330 Installation Manual page 92

Hardware installation procedures for a NetBackup 5330 high availability configuration
Verifying the hardware installation of a high availability configuration
Compute node
Partner node
Primary Storage Shelf
Expansion Storage Shelf
Color keys
Orange: SAS cables connecting the storage shelves
Purple: FC cables connecting the node and Primary
Storage Shelf
Blue: FC cables connecting the partner node and Primary
Storage Shelf
Black: Ethernet cables connecting the two nodes
When all the cables are connected properly, connect the power cords to the
hardware, turn on the hardware, and verify the connections. If the connections are
correct, configure the IPMI port and the NIC1 (eth0) interface.
See "Connecting the power cords to the hardware"
See "Turning on the hardware and verifying operation"
See "Configuring the IPMI port from the NetBackup Appliance Shell Menu"
on page 81.
on page 71.
on page 72.
92