VERITAS NetBackup 5330 Installation Manual page 48

4
Locate the left rail, marked with an L on the side near the front.
The marked side of the rail must face the side of the rack cabinet when
mounted, not the side of the compute node.
5
Identify the protrusions at the end of the rails.
The square protrusion at the top should be placed in the top hole of the RU.
The round blue protrusion at the bottom should be placed in the bottom hole
of the RU.
6
At the rear upper RU of the rack, insert the rear of the rail into the top and the
bottom holes of the RU.
7
Extend the rail toward the front of the rack and insert it into the top and the
bottom holes of the RU.
LEFT
Hardware installation procedures
Installing the compute node
48