VERITAS NetBackup 5330 Installation Manual page 28

5
Remove the front and the rear rack templates from the shipping container. You
will use these templates to locate holes in the rack where screws and pins are
placed.
Note: The templates may be enclosed in the Open Me First box.
6
Remove any foam, air bags, or other cushioning materials.
7
Remove the extension bracket and screws.
8
Remove the bezel and set it aside.
9
Remove the mounting rails and set them aside.
10
Remove the four metal handles and set them aside.
11
Remove any fasteners, power cords, and cables and set them aside.
12
Remove the storage shelf from the shipping container.
Pre-installation requirements
Unpacking a primary shelf or an expansion shelf
28