VERITAS NetBackup 5330 Installation Manual page 84

Accessing and using the Veritas Remote Management interface
To access and use the IPMI web interface from a remote computer
1
Log on to a remote computer in the network and open a supported Windows
browser.
2
Enter the remote management port IP address that is assigned to the remote
management port. The following page appears:
3
Enter your login information. The default user name is sysadmin. The default
password is P@ssw0rd, where 0 is the number zero.
Click Login.
4
The Remote Control section lets you remotely monitor and control the server.
Click Launch Console under the Console Redirection tab to launch the
appliance NetBackup Appliance Shell Menu.
The following figure shows the interface for a 5220, 5230, or a 5330 appliance.
Hardware installation procedures 84