Netbackup 5330 Cables And Connectors - VERITAS NetBackup 5330 Appliance Hardware Installation Manual

NetBackup 5330 cables and connectors

The following types of cables and connectors are provided:
Power cords that connect each device to AC power distribution units (PDUs) in
■
the rack.
Note: A 220VAC power supply is required for the Primary Storage Shelf and
the Expansion Storage Shelf. The NetBackup 5330 compute node can
accommodate a 120VAC or 220VAC input power supply.
The following lists the voltages of the power connectors for the compute node
and storage shelves. The green pin denotes the ground.
The compute node uses the following outlet (C-13) and inlet (C-14) connectors.
These connectors provide the following values:
Voltage: 230, 125 - 250 VAC
■
Current: 10CE, 15UL (amps)
■
The storage shelves use the following outlet (C-19) and inlet (C-20) connectors.
These connectors provide the following values:
Voltage: 230, 125-250 VAC, although the storage shelves only operate at
■
200-240 VAC.
Current: 16CE, 20UL (amps)
■
Fiber Channel (FC) cables that connect the compute node to the Primary Storage
■
Shelf.
SAS cables that connect the Primary Storage Shelf to the Expansion Storage
■
Shelf.
Hardware overview
NetBackup 5330 cables and connectors
15