VERITAS NetBackup 5330 Installation Manual page 38

4
Identify the ledges that are perpendicular to the main part of each rail. The
storage shelf sits on these ledges in the rack.
5
Locate the spacers and place them near the rail screws.
Note: Two types of spacers may ship with the storage shelves. Some spacers
are round, while other spacers are square. Both types of spacers are galvanized
steel. Both types of spacers have the same usage and functionality.
6
To align the rail with the front and the rear RUs, do the following:
Locate the RUs on the front and the rear of the rack that you plan to use.
■
Hardware installation procedures
Installing a primary shelf or an expansion shelf
38