Download
Share
Print this page
VERITAS NetBackup 5330 Hardware Service Procedure
  1. Manuals
  2. Brands
  3. VERITAS Manuals
  4. Storage
  5. NetBackup 5330
  6. Hardware service procedure

VERITAS NetBackup 5330 Hardware Service Procedure

Hide thumbs Also See for NetBackup 5330:
1
2
3
4
5

Advertisement

Quick Links

Download this manual
Veritas Appliance
Hardware Service Procedure
Storage Power Cable Replacement: NetBackup 5330 Appliance
Document Number: 144
Version: 3.1 (6/14/16)
Purpose
This document describes the process for replacing the 53xx RAID or disk storage power cable.
Affected Models
Veritas NetBackup 5330 Appliance Storage Shelf
The NetBackup 5330 Appliance Primary Storage Shelf and Expansion Storage Shelf each contain
60 SAS hard disk drives. The front panel of the Primary Storage Shelf and Expansion Storage Shelf
contain five drawers, which are numbered 1-5, starting with the top drawer. Each drawer contains 12
disk drives, numbered 1 - 12, starting at the front left corner. The front panels of both systems are
physically and functionally the same, as seen in the following diagram.
The following diagram shows the front panel LEDs. The table identifies the components.
The following table describes the LED status definitions.
1

Advertisement

loading

Related Manuals for VERITAS NetBackup 5330

Summary of Contents for VERITAS NetBackup 5330

  • Page 1 Affected Models Veritas NetBackup 5330 Appliance Storage Shelf The NetBackup 5330 Appliance Primary Storage Shelf and Expansion Storage Shelf each contain 60 SAS hard disk drives. The front panel of the Primary Storage Shelf and Expansion Storage Shelf contain five drawers, which are numbered 1-5, starting with the top drawer. Each drawer contains 12 disk drives, numbered 1 - 12, starting at the front left corner.
  • Page 2 HSP #144: Storage Power Cable Replacement Number Definition Color Power LED Green Standby LED Green Locate LED White Over-temperature LED Amber Over-temperature LED Amber Each drawer in a storage shelf contains slots for 12 disks. The disks are numbered as shown in the following diagram.

  • Page 3: Electrical Safety

    Removing and replacing 53xx RAID or disk storage power cable This document describes how to replace a NetBackup 5330 RAID or disk storage power cable to the primary storage shelf or the expansion storage shelf while the appliance is operating. One of the power cables to each storage shelf must be operating at all times.
  • Page 4 HSP #144: Storage Power Cable Replacement To remove the power cable Locate and identify the storage shelf that has the faulty power cable. Do the following as applicable: • Disconnect the faulty power cable from the primary shelf. Warning: Replace one power cable at a time only. If you need to remove both power cables from the Primary Storage Shelf, ensure that there are no I/O operations on the appliance in progress, and then turn off the Primary Shelf.
  • Page 5 HSP #144: Storage Power Cable Replacement • On the Expansion Storage Shelf, connect a power cord to the power supply socket. Connect the other end of each cord to the appropriate AC power source.