Other Netbackup 5330 Product Documentation - VERITAS NetBackup 5330 Installation Manual

Other NetBackup 5330 product documentation

Access the NetBackup Appliance Shell Menu remotely using IPMI if regular
■
network interface is not possible.
Note: Only the NetBackup Appliance Shell Menu can be accessed by using the
IPMI interface. The NetBackup Appliance Web Console cannot be accessed
by using the IPMI interface.
Reimage the appliance from the IPMI interface by using ISO redirection.
■
Monitor hardware health of the appliance from a remote location.
■
Avoid messy cabling and hardware like keyboard, monitor, and mouse (KVM)
■
solutions to access the appliance.
See "Configuring the IPMI port from the NetBackup Appliance Shell Menu"
on page 81.
See "Accessing and using the Veritas Remote Management interface"
Documents for the NetBackup 5330 compute node and storage shelves are listed
in the following table.
NetBackup 5330 Appliance documentation
Table 1-5
Document
NetBackup 5330 Appliance
Product Description Guide
NetBackup 5330 Initial
Configuration Guide
The following documents are also available.
NetBackup Appliance Safety and Maintenance Guide
■
NetBackup Appliance Administrator's Guide
■
NetBackup Appliance Command Reference Guide
■
NetBackup Appliance Release Notes
■
NetBackup Appliance High Availability Reference Guide
■
Other NetBackup 5330 product documentation
Description
Describes all aspects of the NetBackup 5330 compute
node and the attached storage shelves.
Provides guidelines and checklists for the initial
configuration of the compute node. Describes the initial
configuration through the NetBackup Appliance Web
Console.
Hardware overview 22
on page 83.