Power Cables; Network Cable - VERITAS Velocity 7330 Hardware Installation Manual

Power cables

Network cable

Each AC power module of the appliance and of the storage device is configured
with one AC power cable. One end of the AC power cable is connected to the power
socket on the appliance or the storage shelf. The other end of the cable is connected
to the external power supply.
A power cable includes live line, neutral line, and grounding lines.
Figure 1-12
A
A AC power connector (IEC-60320-C14) to an external Power Supply Distribution Unit
(PDU) on a rack.
B AC power connector (IEC-60320-C13) to an appliance or a storage device.
Note: If your power distribution unit is not compatible with the IEC-60320-C13 plug,
then Veritas recommends that you purchase your power cable locally. Make sure
the power cable meets or exceeds the indicated power rating.
See "Network cable"
The Velocity 7330 Appliance communicates with the network through an Ethernet
network cable. One end of the network cable connects to the management network
port or service network port of the appliance. The other end of the cable connects
to the network switch or an external gateway. Both ends of the cable are RJ-45
connectors.
AC power cable
on page 18.
Hardware overview 18
Power cables
B